New & Improved Surge Protector

Standard

Supco has launched a new and improved LINEBACKER Surge Protector that has been updated to meet a broader range of needs! We’re going to tell you what’s changed and how this updated surge protector is the best option for you!

The LBK10 Linebacker surge protector uses state of the art TPMOV (Mersen) technology that’s made with the ability to remove your equipment from damaging surges. This surge protector provides the best solution that your surge protector needs. If the surge protector detects an over-voltage, under-voltage, lost neutral or ground, it won’t allow power to the surge protector or equipment until the condition is resolved.

Applications For Surge Protector

  • Air conditioning compressors
  • Furnaces
  • Pumps
  • Heat pump compressors
  • Refrigeration compressors
  • Motors
  • Air Handlers

Benefits/Features

  • Easy installation of condensing unit
  • Relay to disconnect equipment and/or activate indicator
  • TPMOV Technology
  • Green LED light that indicates surge protection status
  • Weatherproof housing
  • Product warranty for 3 years
  • Connected equipment guarantee for 3 years
  • Voltage Monitor
  • Ground Monitor
  • Type 2 Surge Protection Device

 

lbkimage2_0.jpg

 

LED Indicator Guide

LED Condition

Description Cause Correction
On Steady Equipment is protected Unit is ok No correction needed
Off Equipment is NOT protected Unit has no power or Unit has taken a surge Ensure proper power is restored to unit or  Replace unit
Continuous Flash Initialization period Upon power up unit takes 3 min. to initialize and verify proper voltages and neutral/ ground present Wait until the unit has initialized
One Flash followed by a pause Over voltage One or both phases are above the voltage tolerance Correct the overvoltage condition

 

Two Flashes followed by a pause Under voltage One or both phases are below the voltage tolerance Correct the under voltage condition
Three Flashes followed by a pause Loss of Neutral / Ground Check to verify that the unit is connected to a ground source that is 25 ohms or less to ground. Verify that the neutral ground is good coming into the main electrical panel.

Correct the loss of neutral/ground condition to the unit

 

You can find this Surge Protector on our website and any other parts you may need at http://www.1stsourceservall.com/. Have a question, tip, or comment?  Leave it for us below!  Be sure to like and share this post and subscribe to the 1st Source Servall Blog to receive regular updates.

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.