Supco has launched a new and improved LINEBACKER Surge Protector that has been updated to meet a broader range of needs! We’re going to tell you what’s changed and how this updated surge protector is the best option for you!
The LBK10 Linebacker surge protector uses state of the art TPMOV (Mersen) technology that’s made with the ability to remove your equipment from damaging surges. This surge protector provides the best solution that your surge protector needs. If the surge protector detects an over-voltage, under-voltage, lost neutral or ground, it won’t allow power to the surge protector or equipment until the condition is resolved.
Applications For Surge Protector
- Air conditioning compressors
- Furnaces
- Pumps
- Heat pump compressors
- Refrigeration compressors
- Motors
- Air Handlers
Benefits/Features
- Easy installation of condensing unit
- Relay to disconnect equipment and/or activate indicator
- TPMOV Technology
- Green LED light that indicates surge protection status
- Weatherproof housing
- Product warranty for 3 years
- Connected equipment guarantee for 3 years
- Voltage Monitor
- Ground Monitor
- Type 2 Surge Protection Device
LED Indicator Guide
LED Condition |
Description | Cause | Correction |
On Steady | Equipment is protected | Unit is ok | No correction needed |
Off | Equipment is NOT protected | Unit has no power or Unit has taken a surge | Ensure proper power is restored to unit or Replace unit |
Continuous Flash | Initialization period | Upon power up unit takes 3 min. to initialize and verify proper voltages and neutral/ ground present | Wait until the unit has initialized |
One Flash followed by a pause | Over voltage | One or both phases are above the voltage tolerance | Correct the overvoltage condition
|
Two Flashes followed by a pause | Under voltage | One or both phases are below the voltage tolerance | Correct the under voltage condition |
Three Flashes followed by a pause | Loss of Neutral / Ground | Check to verify that the unit is connected to a ground source that is 25 ohms or less to ground. Verify that the neutral ground is good coming into the main electrical panel. |
Correct the loss of neutral/ground condition to the unit |
You can find this Surge Protector on our website and any other parts you may need at http://www.1stsourceservall.com/. Have a question, tip, or comment? Leave it for us below! Be sure to like and share this post and subscribe to the 1st Source Servall Blog to receive regular updates.